I would suggest you look into inheritance models. This is exactly what they were setup to do.
Tutorial: Using Inheritance Models for “In Process” Manufacturing Models of Weldments
Re: How do I create a part model "machined.prt" using a portion (25 mm of 250 mm bar)of bar-stock.prt Model (Extruded bar) as material. I want the Stock model drive the machined part profile. I also need to report in structure
↧
↧
Re: Error computing large program
Try to change the fourth argument (D) in the vector S from 7 to 10.
Can anybody explain that error?
One problem I could imagine is, that the if statements should always cover all cases and therefore should be "closed" with an otherwise statement. This is not the case with many if statements in this program and some do not cover all possible cases.
The program uses no array anyway but I guess that the top statements which try to set the global worksheet variables ORIGIN and TOL will not have the desired effect - they have to be set outside the program.
LT
↧
Re: How do I create a part model "machined.prt" using a portion (25 mm of 250 mm bar)of bar-stock.prt Model (Extruded bar) as material. I want the Stock model drive the machined part profile. I also need to report in structure
It can be done in many ways. Please refer tutorial suggested by Christopher/hit on link
Tutorial: Using Inheritance Models for “In Process” Manufacturing Models of Weldments
↧
Can we create detail licensing report in Excel formatt
Can we create detail licensing report in Excel format. Mean to say is it possible to get exact details of License used like who are using which license when it was released,host ID, server details and all
↧
Re: Windchill UWGM Crashing (WIth Inventor as CAD) while Switching between workspace in 10.2 M030 CP01, anyone suggest where to debug the reason?
Hi Nazeer,
We are seeing something similar with Unigraphics NX on 10.2 M020 CPS 06. A few users report the problem, but not all users. We're still trying to debug and we have been providing logs to PTC, but we have no idea what the root cause it yet. I'll let you know if we learn something.
↧
↧
Re: JSONB_getWFBrowserEnv call failed!
Hi,
I think your trying to Use incompatible versions, Kindly check your Creo and Windchill Version Compatibilites.
Regards,
Mahesh Kumar
↧
How to post .swf video captured using TechSmith Jing?
Hello all,
I have found:
I use TechSmith's Jing to capture screen videos to create user guides and manuals. I have tried to post the resulting flash video to the forums only to have the system not accept the file.
Does anyone have any advice or experience with posting flas based video?
- Jim
↧
Re: How do I create a part model "machined.prt" using a portion (25 mm of 250 mm bar)of bar-stock.prt Model (Extruded bar) as material. I want the Stock model drive the machined part profile. I also need to report in structure
A couple of ideas come to mind...
If by reporting in the structure, you are referring to WTPart Structure in Windchill then there are a couple of trade-offs to consider:
- You could set the stock up as a flexible part with flexible length, constant profile and add it in as a child to machines.asm (rather than machined.prt). Upside is that this will "build" the structure you want, although you'll probably still want to manipulate the WTPart Structure to remove the each occurrence of stock.prt and replace it with Quantity = XXX and Unit = [length measure]. The disadvantage here is that all of your "machined" features are assembly features which (in my experience) do not publish into the Creo-View Viewable (this is a royal pain with machined weldments where the weldment is modelled as an assembly with material modelled as parts)
- You can set the association type to Contributing Image and manually construct your WTPart Structure. If you're okay with this, then you could use a merge inheritance feature or imported data (first geometry feature). This has the advantage of machined features being published in the viewable. The downside is that you're probably importing a full length of stock and removing a large amount which makes the model bounding box larger than need be.
↧
Filter Skeletons out of BOM
A couple of folks suggested manually filtering by item. This works, but
I was looking for an automated way, in the unlikely event that a
skeleton is added, it will automatically get filtered. A table can be
saved with this filter (I think) and it will then filter skeletons
whenever it is applied to a drawing.
I found it at MCADCentral [1] via Google:
Go to Table -> Repeat Region -> Filters -> [select your table] -> By
Rule -> Add
Then paste the line in the entry field and hit enter:
&asm.mbr.type != SKELETON*
Finally, click 'Update Tables' to refresh the table display.
[1] -
http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=38610&PN=32&ge
<">>
Tel +1 614 890 0202
Fax
Design Central designet
6464 Presidential Gateway
Columbus, Ohio 43231
USA
Confidentiality Notice
This is a transmission from Design Central Inc, Columbus, Ohio which may
be privileged and confidential, and thus is protected from disclosure.
This message is NOT intended for transmission to, or receipt by, anyone
other than the named addressee (or a person authorized to receive and
deliver it to the named addressee). If the reader of this message is not
the intended recipient, or an employee or agent responsible for
delivering this message to the intended recipient, you are hereby
notified that any dissemination, distribution or copying of this
communication is strictly prohibited. If you have received this e-mail
message in error, kindly accept our apology and please delete it from
your system without copying or forwarding it, and notify the sender of
the error by reply e-mail or by calling (collect).
I was looking for an automated way, in the unlikely event that a
skeleton is added, it will automatically get filtered. A table can be
saved with this filter (I think) and it will then filter skeletons
whenever it is applied to a drawing.
I found it at MCADCentral [1] via Google:
Go to Table -> Repeat Region -> Filters -> [select your table] -> By
Rule -> Add
Then paste the line in the entry field and hit enter:
&asm.mbr.type != SKELETON*
Finally, click 'Update Tables' to refresh the table display.
[1] -
http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=38610&PN=32&ge
<">>
Tel +1 614 890 0202
Fax
Design Central designet
6464 Presidential Gateway
Columbus, Ohio 43231
USA
Confidentiality Notice
This is a transmission from Design Central Inc, Columbus, Ohio which may
be privileged and confidential, and thus is protected from disclosure.
This message is NOT intended for transmission to, or receipt by, anyone
other than the named addressee (or a person authorized to receive and
deliver it to the named addressee). If the reader of this message is not
the intended recipient, or an employee or agent responsible for
delivering this message to the intended recipient, you are hereby
notified that any dissemination, distribution or copying of this
communication is strictly prohibited. If you have received this e-mail
message in error, kindly accept our apology and please delete it from
your system without copying or forwarding it, and notify the sender of
the error by reply e-mail or by calling (collect).
↧
↧
Re: WF mouse type
My Microsoft Intellimouse Trackball Explorer works great, I set extra
buttons to Ctrl, Crtl A (Window Activate), for xtop.exe, and to other
functions for Windows and IE, no problems at all.
Ryan Crisp
Engineer, Mechanical Engineering
r.crisp@design-central.com
Tel +1 614 890 0202
Fax
buttons to Ctrl, Crtl A (Window Activate), for xtop.exe, and to other
functions for Windows and IE, no problems at all.
Ryan Crisp
Engineer, Mechanical Engineering
r.crisp@design-central.com
Tel +1 614 890 0202
Fax
↧
Re: Editor and Terminal Services?
Arbortext 5.3 does not have the restrictions you're reading about. It is only the newer Arbortext versions that use FlexNet licensing which have restrictions on terminal services sessions. For those type of remote sessions you cannot use node-locked licenses. You can use floating or registered user licenses in that situation.
↧
Re: Replace start part in legacy models
I'd solve the problem of opening and closing each found file with Autohotkey. The script you can learn to create with it can let you find only the specific file types within any amount of subfolders. It's not that hard to learn as you may think at first. If you prefer any other scripting language then go ahead.
If you need any help with AHK then let me know.
↧
Robotics Team Mentoring
I am part of an FTC second year robotics team of ten members in Oregon. We have only used basic functions of PTC Creo in our robot design process and believe it would be best to have a expert give us a quick tutorial or two. Our objectives are to learn how to model and create simple parts and to edit ones that are already made.
Is there anybody who would be willing to schedule a couple video call/in person sessions with my team to go through some helpful and essential skills in PTC Creo Parametric?
We would be willing to sponsor you or a company of your choice in return.
Any help would be appreciated.
Please respond if you are interested.
-Alexander Singh La Cour Team Total Reboot 8441
↧
↧
Re: How can I control the spacing of dashes in phantom, centerline, hidden, and similar lines when exporting a PDF?
↧
Re: Creo 2.0 Distributed Batch.
Many thanks for reply.
But whats happen when my comapny dosent have license on each Computer, but have a floating licenses wchich
every PC (where is installation of Creo), "download" from our license server?
In this situation also i can use standalone license? (i want use DB only on one PC where i currently work on creo installation, i dont need use DB on network)
So second thing is when i dont have a administration pr. on my computer, it is neccesary to reinstal creo for install DB?
↧
Re: Creo 2.0 Distributed Batch.
Hi,
Distributed Batch is free (no license required). "Standalone" in Martin's reply is for service manager, if you don't have advance licenses for service manager you can use Standalone. You can simply execute the Distributed batch referring the steps in earlier reply.
If you didn't install distributed batch earlier, you can install distributed batch from installation media (using setup.exe)
↧
Re: Error computing large program
"Mathcad handles something like "quantity with units"+0 by assuming the 0 has the appropriate units."
But in the given case of the IF statement there is no addition, it's replacement, and then you loose the units.
I ran the program in Mathcad 11 and it complained about units in the UF.TenBnd definition. After I changed the IF statement like I show above, the program ran without problems, and fast (although I don't know if the answer it gave was any good).
My conclusion: it's definitely a Mathcad 15 problem.
Luc
↧
↧
Re: Stress analysis simulation on welded parts
Model weld as separate solid part. Define bonded interface between part /weld. Also define contact interface between both parts or surfaces.
So that the parts are ''merged'' using weld part.
The weld it self is probably not going to fail anyway, its the area near the weld that is of interest.
↧
Re: Creo 3.0 will not extrude using windows 8.1
This is happening to me also. Need answer.
↧
Re: Isolate selected components in assembly
1. kindly stop thinking Solidworks and Inventor way..to work better in Creo.
2.yes you are right, the master option works only once, after using it ones you can further use the exclude option to remove the component/components which you do not want.
3. Solidworks and Inventor were made with ease of use in mind, the would always be better in ease of use.
↧
More Pages to Explore .....
