Re: Need to solid and repair
yeah what he said. I looked at it again, and you can sort of guess where to put the balls back in (probably get it within 0.001"), but it's not a few minutes worth of work.
View ArticleRe: Creo Direct 19.0 ?
The files I downloaded yesterday are named:Creo-Elements-Direct-Modeling-Express4-M010-32-setup-EN.exeCreo-Elements-Direct-Modeling-Express4-M010-64-setup-EN.exeI installed the x64, and I don't...
View ArticleRe: Annotation
Bonjour, Je m' en suis sorti en créant une pièce simple dans modeling (1 rectangle extrudé) puis je bascule dans annotation et là je change l' échelle.Nouveau Pb : je n'arrive pas à modifier les...
View ArticleRe: Creo Direct 19.0 ?
Before tell me V19.0 download is available on 20-June, now delay to 28-June. More disappointed for Creo Parametric 3.0, it delay to 18-July.
View ArticleRe: What's new in Creo Parametric 3.0?
Information from Sale, it delays four weeks to 18-July for Creo Parametric download. Very disappointed for PTC, product release date always delay and delay again.
View ArticleRe: PTC Creo 3.0 F000 to be available in July...
Referring to https://www.ptc.com/view?im_dbkey=67180Creo 3.0 is compatibility with Windchill 10.1 and 10.2 only
View ArticleRe: How is this made?
Thanks Matt, though since that's on the page ... I was refering to the ability to spin, scroll, and zoom through the 3D scene in a browser. Also, one of the modes shows live reflection calcs on the...
View ArticleRe: How is this made?
OK Found it - it's buried in a dropdown. One that says View on Sketchfab. ****Publish & embed interactive 3D models Instant in-browser viewer No plugin required 27+ supported formats...
View ArticleRe: [ e^(-1i*a*x) ]^(1i / a*x) - e = 0 , substitute,a=2, solve,x . How many...
(e^B)^C=e^(B*C)As we are obviously dealing with complex numbers, thats only true if C is an integer! Otherwise any complex number with magnitude e^(B*C) and argument any integer multiple of C*2*pi is...
View ArticleRe: "works to product specification" - who writes these things???
Hi Tom, Thank you for bringing this to our attention. I've pulled this article from the public domain and submitted it for rework by an engineer in that product area. In the future, the "Did this...
View ArticleRe: The end of Creo Simulate ?
This disucssion was not marked as a 'Question' by the original poster, so unfortunately there is no option to mark any reply as 'Helpful' or 'Correct'.
View ArticleRe: Basic Dim with GD&T
I think this was one of the few that didn't make it to the detail.dtl config options. You can change the default text style in the session but I am not sure if it saves it outside the current drawing,...
View ArticleClik here to view.
Re: SAVING PLANES WITHIN A STEP FILE
I use ap214_is and it askes if you want to export Annotations. Which imported back in looks like this.
View ArticleRe: SAVING PLANES WITHIN A STEP FILE
I looked and there's a ton of STEP formats. STEP was to avoid the cacophany of IGES, where everyone 'supported' IGES but used limited and unique subsets, by specifying test suites. Don't support the...
View ArticleRe: UDF for counter bores
Ok. I think I understand. I need to copy one of the existing .hol files and start editing the values in it. Then select that file name when creating the feature. Thanks for the help again.
View ArticleClik here to view.
Re: SAVING PLANES WITHIN A STEP FILE
Matt; confirmed. I needed to delete the step_config.pro file in the working folder to get this to work. Never considered planes to be annotation
View ArticleClik here to view.
How to export .obj format file?
Others want .obj format file,but I have no idea to export it, when I select save as...,and choose the .obj extension, I can't add any prt,I searched the forum,get little information.So,help me everyone.
View ArticleRe: How to export .obj format file?
Zhenqiang Add > Select the parts (from Model Tree or graphics) > Ok > Select the coordinate system > Ok.
View Article