Clik here to view.
Gtol, I can't add 2 Gtol on on datum
I have 2 reference planes on my product. Each plane has a flatness demand of 0.1 mm and to each other these planes need to be parallel within 0.2 mm.I can add only one Gtol to a datum.If I try to add...
View ArticleRe: Wiring Harness Layout Drawing
Hi John, I agree that cabling is not the easiest module.Correcting mistakes in the design could have been a pain in Wildfire 4.0 and before. Plus it was easy to make mistakes. So experience made a real...
View ArticleRe: Creating Flattening Harness
Flat harness is a completely new model that references your cabling.You have control over what you want to "fan out", you do not have to do this for all cables and wires.There is an automatic option...
View ArticleRe: Location where a member is shared using CLI commands
Hi Wesley, This solution is exactly my need. I couldn't find "configpath" option in my SI CLI manual.I will try to find the latest version. Thank you! Bogdan
View ArticleClik here to view.
Re: Is there a way to fill the hole?
My attempt. Meh, lost my nerve near the end so if you can finish it cool. Btw in Creo 3 we can fill holes when copying quilt but not that complex.NX fill is real nice but in this case still gives less...
View ArticleRe: Is there a way to fill the hole?
In Creo 3.0 there is new enhancement Fill Loops in Parting Surface, please refer to http://learningexchange.ptc.com/tutorial/3465/creating-a-parting-surface-using-fill-loops for detail.
View ArticleClik here to view.
Re: PTC Creo 3.0 Now Available!
Tim,I note the spec. says it won't run on Vista or XP.Regards,Bob
View ArticleRe: PTC Creo 3.0 Now Available!
Downloading as we speak - I will report back on my findings compared to the Academic2 Creo 2.0 license I currently have. Rgds, James
View ArticleRe: arbortext 3b2 software encrypt dongle
As far as i know all APP related dongle replacements are managed by the German office, but you may want to contact eurlm@ptc.com to be sure as you will need to send your dongle to them for any...
View ArticleRe: Tips for text
Hi, Please suggest me what is the syntax for overriding added dimension with parametric dimension. Ex: Added dimension is 45 degrees, i want to replace this with driven dimension 60 degrees. Thanks...
View ArticleRe: Using facet feature as a reference
Hello Karlis, welcome to the forum!I have not much practical experience with scanned data in production, but from the functionality point of view, the key points are:Triangulated surfaces and...
View ArticleClik here to view.
Re: Multi-Dimensional Arrays (MDAs)
Mike Armstrong wrote: Maybe create an idea and encourage people to vote Are non-maintenance users now allowed to create ideas?... hmm, just checking ... No, they aren't. Perhaps a maintenance-paying...
View ArticleRe: Export and Import Of ACL's
There are a bunch of reports on the forums that allow you to visualize rules by entry. You can then pull these into Excel and make a very handy pivot table. This is great for better visualization, but...
View ArticleClik here to view.
Re: Multi-Dimensional Arrays (MDAs)
StuartBruff wrote: Mike Armstrong wrote: Maybe create an idea and encourage people to vote Are non-maintenance users now allowed to create ideas?... hmm, just checking ... No, they aren't. Perhaps a...
View ArticleClik here to view.
Re: Workflow Admin: Share Your Customizations & Mods (and Screenshots)
We prefer to keep the task page clean and simple and have removed all instructions. Instead we have a "click here for instructions" hyperlink which takes the user to the relevant page in our Windchill...
View ArticleRe: Multi-Dimensional Arrays (MDAs)
Mike Armstrong wrote: My account has recently changed from non-maintenance to maintainence for no apparent reason, so when I get a chance I will create the idea using some of the spiel from this thread...
View ArticleRe: How can I DO?
jinsuk Lee wrote: Is it possible to know which section do I need to study? Unfortunately I cannot tell you that, you have to identify where you are struggling. Werner has suggested various subjects...
View ArticleClik here to view.
Hide cosmetics in drw
Hi, I am using Creo 2.0 and I would like to know how hide cosmetic that not belong to the section. See the attachment. Thanks!!
View ArticleRe: Differ between users and groups in trigger script
Hi Kael,some more infos and questions: - The function Server.getUsersOfGroup(groupname) does not lead to an exception if groupname is not in the system, but directly to an entry in server.log. So we...
View Article