Re: Can someone tell me why this unbend fails?
Hello Antonius,If you create a sheet metal part, the default accuracy will be absolute. For solid parts it is relative.If you create a solid part, and then convert it to sheet metal, you will stay with...
View ArticleDifferent color's for front and back surface
I use Creo 2.0. Under ProE, you could apply the front and back with a different color on a surface (not a Solidsurface). This was particularly useful for complex/detailed construction tasks. How do I...
View ArticleRe: Mathcad 14 m020 Add-in for Excel
Excel asks for a password for the mathcad addin. Wat to do now??Thanks,Raj
View ArticleRe: Use parameter from assembly in a part
How about using parts or subassembly as skeleton "replacement" just give them some material with close to 0 mass.
View ArticleRe: Use parameter from assembly in a part
Davor,I would use the relation the other way round from the assembly.X:sid=PARAMETERwith sid the session_id of your part. If the parameter in your part does not exist it will be created.So you could...
View ArticleRe: How to create Corrugated Tube in Creo Cablng, Please Help me out.
I fear this is not supported with cabling or pipingCabling and piping both use defined sections which are routed with constant shape - this leaves no room to ribs.You either will have to design them...
View ArticleRe: repeat command places components randomly
I could not find any hints to this issue in our database.Maybe the component gets added into the model tree close to the features it gets referenced to?That would make it look more intentional than...
View ArticleRe: Model Tree Question
Hi, RMB on the assembly name in the model tree --> Info --> Model.
View Articlehow to attach a note with a leader to a symbol in creo
A symbol consisting of lines or text may not be attachable when placed on a drawing. Is it possible to add any to the symbol that may be attached.SampleA symbol of a valve is placed 2 times on a...
View ArticleRe: Profile milling, avoiding retract
Designing surfaces is surely an art for itself and often useful when it comes to set up not so simple manufacturing sequences.But maybe I can help about mill windows:They are basically equivalent to a...
View ArticleClik here to view.
Re: Model Tree Question
Thanks for that but it still doesnt give me a location for the individual parts? See attached screen shot. I need to be able to see if a part is being pulled in from the project fold or pulled in from...
View ArticleRe: Milling Sequences - Drawing Sheet
Or do you want to document the sequence settings?In that case you can use a report table and enter the desired sequence parameters as User Defined.
View ArticleRe: Eurocode 3 anyone?
Anybody out there, who can interpret the Eurocode 3 standard for Mats, when it says:"design value of effect of actions should be less than the design value of the resistance"
View ArticleRe: Milling Sequences - Drawing Sheet
Hi Thank you for your reply My show path is invisible in my machine. I have complete machining extension license. Kindly tell me what i need do to next ?
View ArticleClik here to view.
Re: Milling Sequences - Drawing Sheet
Thank you for sharing your knowledge with us !! I want each and every sequence as a separate drawing .
View ArticleRe: Creo 2.0 Issue with Microsoft Surface Pro 2
use this config option. enable_opengl_fbo no
View ArticleRe: Large Deformation FEA
You'll notice that the model I ran did not have your weldment feature at the top of the tube; I used a Total Load At Point (TLAP) to approximate the load transfer through the weldment. I think that,...
View Article