Clik here to view.
Re: Projection Arrows in drw
If you are showing the arrows from the section tab of the view properties, it should show the offset x-sections arrows as you have sketched them.
View ArticleRe: Problem with flexible parameters in assembly
ok for the ampersand. For the angle limits in pin connection, this is exactly what my relations do but I set the min angle through a parameter. As for the curve solution, can you move the chain on the...
View ArticleRe: Projection Arrows in drw
Thanks Stephen; I was getting lost in terminology. That field does hide itself by default. Glad you got it worked out, Roger. Have a great day!
View ArticleClik here to view.
Re: What is corner_offset in local milling? help document doesn't explain...
my current part has inside corner R0.13 and R0.16, I use 1/2 end mill to do all profile cutting, no problem. then I tried to use 1/4 end mill only do corner cutting, I use local milling to clean the...
View ArticleRe: Problem with flexible parameters in assembly
I would have to try this again. Some things animate and regenerations don't. I have not used declaring flexibility at the part level. I will look at this also.
View ArticleProblem with AAX and ISDX
I recently had a hard drive failure. When I got my computer back from IT, I was no longer able to use AAX (Advanced Assembly Extension) and ISDX (Interactive Surface Design Extension). My IT person...
View ArticleIcons next to model tree right click actions, Creo 2.0
I don't know what to call this thus the horrible title. When I right click on a part in an assembly I get a bunch of actions listed out. I was watching a video on PTCU where the instructor had icons...
View ArticleRe: Symbolic calculation, units and programs in MP3.0
Woops ! I assumed the unit for grams was g and didn't check... shame on me !
View ArticleRe: Problem with flexible parameters in assembly
I attached the files in order to make my problem easier to understand. Edit: Attachment removed by user request. (Ryan Kelley)
View ArticleRe: Tapping in Creo
Steve, This is an English unit mfg session, but these features of the part happen to be metric. I have the thread feed parameter set at 1.5 MMPR. Maybe the English/Metric hybrid is an issue?
View ArticleRe: Tapping in Creo
Matt,I think you need the G95 in the G84 line is what I was pointing out for the feed not to read ipm or mmpm
View ArticleRe: Icons next to model tree right click actions, Creo 2.0
I think this is something new to Creo 3.0 and it is not available in Creo 2.0. I have only briefly tested 3.0 and I very much like the new icons as well.
View ArticleClik here to view.
Re: Icons next to model tree right click actions, Creo 2.0
Dan, Right mouse options with icons are from Creo 3.0 and seems you are working with Creo 2.0 where Right click will display options without icons.
View ArticleRe: Symbolic calculation, units and programs in MP3.0
Adrien Thurin wrote: Woops ! I assumed the unit for grams was g So did J G, I guess.
View ArticleClik here to view.
Re: Auto - Numbering Scheme: how to reset to a given number
OK - if adjusting Numbering Scheme is unavoidable then here's what I would do... Use the Database Shell to create a number of sequences for then next number of years... 10, 20 50 100 more (your call)...
View ArticleRe: Rigid Body Analysis - 3D Bolt Pattern
Hi Steven, have you been able to get a sheet for this purpose from another source or have you been forced to create it on your own? Gunter
View ArticleRe: Solve equation with variables of different units
With your instructions, I managed to solve the problem, in the same way that your first approach. Again, thank you very much Werner
View ArticleClik here to view.
Re: Sweep/Blend with Multiple Trajectories
yes it was there previously in the standard datum curve menu (pro/e 2001).i do not know why they removed it.
View ArticleClik here to view.