Re: New part starts with wrong scale
I have Creo 2.0. It might as well been something I did or did not. I resolved the "glitch" so that I opened all the parts, the skeleton and the assembly one by one and then changed the unit system in...
View ArticleClik here to view.
Re: Mathcad 2.0 won't let me define this as a variable
Forgot to mention a more "legal" (hope so) way to convert a range into a vector.
View ArticleClik here to view.
Re: Problems with Free Creo Elemants Direct Mode software
Reinstalled 4 times and now I'm back on designing my car again
View ArticleThe end of Creo Simulate ?
A friend of mine, who works at PTC, told me that a couple of months ago the core of Creo Simulate development group (the most experienced developers and managers) was suddenly laid off.You may want to...
View ArticleThe end of Creo Simulate ?
A friend of mine, who works at PTC, told me that a couple of months ago the core of Creo Simulate development group (the most experienced developers and managers) was suddenly laid off.You may want to...
View ArticleRe: How to properly use constraints and rules followed by Mathcad's Solver
Hi Alan, Thanks, I missed the alpha change that must have happend when I was playing around iwth it. With that being said is there any way to get the solver to display multiple possible solutions if...
View ArticleClik here to view.
Re: total_sheets
So please cross out 'cheat', and instead of it answer a question: is there any 'smart' way to show parameter in drawing that will be calculate in a following way: my_total_sheets=total_sheets:d -1;? In...
View ArticleRe: total_sheets
No. It isn't smart to show that. The result you are looking for can be obtained by paying PTC for a custom solution. Your sales rep should be delighted to help.
View ArticleRe: total_sheets
Again, I think the answer is no. Without drawing relations, there's no way to control this. You also cannot access the total sheets external to the drawing. In a situation where you have two...
View ArticleRe: total_sheets
David, I don't know if you have access to ptc.com/support - but if yes, please look at Case Details - 11764712. I work in VAR company, and unfortunatelly I was asked by customer to find sollution for...
View ArticleClik here to view.
Re: Selection Tricks/Workarounds?
For isolating components, you can: 1 - Select Components (Graphic area, tree, find tool, etc.)2 - RMB->Set Representation To->Master. It only works if the simplified rep is unchanged, but is...
View ArticleClik here to view.
Re: How to properly use constraints and rules followed by Mathcad's Solver
adam miller wrote: With that being said is there any way to get the solver to display multiple possible solutions if not all that it can find in a particular range? Thanks, Adam There are an infinite...
View ArticleClik here to view.
Re: Rnd in Mathcad
What's wrong with this assessment of the rnd function:The results come pretty close to what they should be. Luc
View ArticleRe: total_sheets
You reminded me, that some time ago I created drawing that behaved depending on the part on drw. For sure it was done for family table instances (flat state is also an instance). I'm not sure if i used...
View ArticleRe: How to properly use constraints and rules followed by Mathcad's Solver
Here, for example, several results are determined for a range of values of t and H. (Also, because there are sometimes multiple solutions for single values of t and H (as in the image in my previous...
View ArticleRe: Control - List Box
GERARD LARDNER wrote: Making Custom Controls Persistent.This page seems to have disappeared. I could find it only on the Internet Archive, at...
View ArticlePress fit check box
Hi, The highlighted check box in the attached image is ticked by default with the default value of ignore interpenetrations larger than 0mm This means that all contacts will be ignored by default. For...
View ArticleRe: Using CreoView to initiate Change request in Windchil
Hi Brad have a look to this similar topicChange Request - Annotations Table the action is hidden in the right mouse click ... not easy to find .... regards Gregory
View ArticleClik here to view.
Re: Product idea - numeric on screen keypad
Yep, that's the mouse. 12 buttons on the side. It also has a fourth button on the top for the ring finger that shifts the 12 buttons to something else while holding it down...that gives you 24...
View ArticleRe: Using CreoView to initiate Change request in Windchil
Gregory,Thanks, that was what I was missing, all good now.Thanks againBrad
View Article