Clik here to view.
Re: Creo Schematics BOM report
Hi Choose InventoryAssuming you want to display name and then report on something that can report total for example Part number set the inventory column priorityYou will then get the total for part...
View ArticleClik here to view.
Re: Unsure how to interpret Minerr result...
Hi Richard, Thankyou for the worksheets. I didn't realise you could do it that way, much cleaner! I seem to have a 'Floating Point Error' with it at the moment, just trying to track it down at the...
View ArticleWhat really is an Archive and can file information be handled directly.
We are evaluating the PTC Integrity tool, and we have a databased system for tracking files for projects and a very flat means of tracking files in a repository by individual files/branches/versions....
View ArticleRe: Unsure how to interpret Minerr result...
I'm not sure which precision you are referring to. Can you be more specific? If you simply evaluate the function Resid(SX,SY,SZ,BX,BY,BZ,u1,u2,u3) above the solve block, what happens? Do you get the...
View ArticleRe: Need help with editing imported files into creo elements pro school edition
You can just start modeling on your STEP import. I am not sure what you mean by edit directly. You should be able to do whatever you want with the import as long as it came in solid.
View ArticleRe: Need help with editing imported files into creo elements pro school edition
Hi, I dont know how to access the edit interface i cant seem to find it, i dont know if it has something to do with the version of creo im using which has limited functions (creo elements pro schools...
View ArticleRe: Creating Degrees of Freedom in Weighted Link
Can you post your model files? What you're doing (again, at least as I understand it) should not run. We'llcall the weighted-link that is between the mass point and the point in front of an on axis...
View ArticleRe: How do you edit an imported file on creo??
You might begin with trying the offset feature to create a new surface. You can then thicken the surface and work on it, or you can create a surface quilt model of what you want, then thicken it. No...
View ArticleRe: Need help with editing imported files into creo elements pro school edition
Ah, I don't know that UI. Regular CREO2 is on the modeling tools when you open a model.
View ArticleClik here to view.
Clik here to view.
Re: tracing the edge of a cutting tool (toolpath)
Yeah, I realized that I wasn't being very clear. I was trying to say we can rule out these types of cases: I actually like your algorithm. It'll be slower than Richard's method (I think), but it'd be...
View ArticleRe: tracing the edge of a cutting tool (toolpath)
I guess my algo would deal with all those cases, too. You just have to takle care of numerical inaccuracies - just use a slightly smaller radius when you delete the points just to be sure that points...
View ArticleRe: tracing the edge of a cutting tool (toolpath)
A slight modification to what you suggest: First go along both the red and green lines and check for any intersection with either another segment in the green line, or another segment in the red line....
View ArticleRe: tracing the edge of a cutting tool (toolpath)
Good idea. I guess every point of intersection will be added twice to the list and at the end both will have survived. So the last phase of the algorithm would be the deletion of those duplicates.
View ArticleRe: tracing the edge of a cutting tool (toolpath)
There is another modification that would improve the accuracy of the final shape a lot. As the paths are built, instead of just adding two points on each side of the path, divide the circle...
View ArticleRe: Model Tree graphics question.
yeah.....we need to get you away from these Dell's. hehe.I hear ya, I know you have had issues with drivers. I have run multiple Dell desktops and laptops on newer drivers and have not had issues MOST...
View ArticleClik here to view.
Clik here to view.
Attempt to launch MKS Integrity client Timed out.
Hello, This is my first time with MKS. We are using MKS Integrity Client, most of us are using windows client. I'm on a mac and would like to setup my development environment in a VM, preferably a...
View ArticleCosmetic Thread Line Weight in Drawing Creo Parametric 2.0
Hey all, I've searched around for a solution to this but am coming up empty and could use your help. I've got a bunch of screw machine parts with a variety of threads. I'd like to use cosmetic...
View Article