Re: Cosmetic threads? Hiding threads in hidden line removed view
I get that kind of behavior a lot when changing hole characteristics. Really poor implementation. When I change a hole from depth to through, it seems to loose all kinds of references including...
View ArticleRe: QR Model Problems
You need closed-boundary sketches. No crossing lines and no spare curves.
View ArticleRe: Cosmetic threads? Hiding threads in hidden line removed view
I think I figured out your mate issue, and it should have given me a heads up. When you are choosing surfaces to be coincident on the threaded surfaces and the bolts or what ever you are mating up....
View ArticleRe: Cosmetic threads? Hiding threads in hidden line removed view
Thank goodness the first part I started dimensioning - all the holes were thru/clearance holes so it didn't mess up drawings.
View ArticleRe: QR Model Problems
Is it possible to make a closed boundary sketch with a QR code - i did not cross lines and there are no curves in that sketch. As I understand it, it is closed boundary because all the shapes that...
View ArticleRe: QR Model Problems
Where does the QR geometry come from? If it's a datum curve, then to use it to make a solid protrusion it can't be self intersecting and I think it can't share corners. Each vertex in a typical solid...
View ArticleRe: Cosmetic threads? Hiding threads in hidden line removed view
I always reference the axis for placement (to avoid "coincidents" masking as "tangencies"). It seems the axis is also being replaced.
View ArticleRe: Periodic function doesn't work with ODEsolve?
Werner Exinger wrote: Guess I wouldn't have thought of that. But here again a further disadvantage of Prime as we cannot influence the algorithm used in that program. We had the very same question...
View ArticleRe: PTC Mathcad Prime 3.0 now available
Yes, very off topic. But, happy to provide my insights. 1. Hmm, interesting! I guess regardless if a discussion is branched that it retains the original subject line in the "Recent Content"...
View ArticleUsing Fasteners - Creo Simulate
I was studying about the use of fasteners (adding them directly with the software tool) in Creo Simulate 2.0 and I couldn't find some answers for the doubts below: Simulate 2.0 really doesn't...
View ArticleWhat is the basis for "Default of type"
Choosing the Inductor > Coil, In Windchill Qualisy Solution 10.1, the default type of Coil is "RF, Fixed or Molded" Why???
View ArticleAssign a color to a 3D graph
Team,I need to be able to assign a color, based upon wall tension, to a 3D graph of an ellipsoid. In a separate graph, I will also need to asign a color to change in tension in the ellipsoid.Thanks
View ArticleIssue with plotting vectors
Hello, I'm sure this has been answered before, but I'm wondering why I am unable to plot two vectors while I am able to plot another. I'm unsure of the tecnical reason why. I would appreciate any...
View ArticleRe: How to solve an equation with a complex variable
Yes.here's anotherlook.Let: G(s):=1/[s*(s+1)];this wayhe(MathCad Prime 3.0) can: solve,b,assume,b=real,b>0,float,3|G(0+1j*b)| =1...
View ArticleRe: Epic 5.3 problems with Windows 7 (S1000D)
Unfortunately if you do not have active maintenance then it is often cheaper to just buy the software again than renew maintenance. BTW, I just had another thought but what about using Windows XP Mode...
View ArticleRe: Setting up floating-license for Arbortext Styler 6.1
If you are installing a floating license for 6.1 then you will need FlexNet Licensing Server software, available for free from PTC. You then need to obtain a license file to install into FlexNet. This...
View ArticleRe: individual pipe color change
spec driven piping or non spec driven piping? If the pipes are in different assembly, you can change the color by selecting the respective assembly.
View ArticleRe: manual selection of method for odesolve, minerr, find in Prime
I've thought some more about the advantages and disadvantages of right clicking to select the method vs. typing a keyword. The click method is a faster way to test the methods, but then the worksheet...
View ArticleRe: Format (.frm) not saving
save your file to following folder Creo 2.0\Common Files\M100\formats.
View ArticleRe: Trying to find best order with Import Data Doctor
IF YOU CAN'T UPLOAD THE DATA,THATS OK.BUT WHAT IF YOU SELECT SOME AREA OF THE MODEL THAT YOU THINK IS IN WORST CONDITION,MAKE A NEW FILE OF THAT AREA ONLY AND SHARE. REGARDS:S.M.FURQAN ALII can try...
View Article