Clik here to view.
Re: How to change STL faceting of flat circular surfaces
You're very welcome. This interested me so I thought I'd look at it, hope we all learned something from it!
View ArticleClik here to view.
Re: Show dimensions by feature and view
That does not work Linda. It always shows the dimensions on the very first view added to the drawing. See.. you got lucky by choosing the first view.I'm on Creo 2.0 M100 and I don't beleive anything...
View ArticleUsing Old MathCad
I have owned Mathcad for over13 years, starting before 2001. The last version I purchased and installed was 13 (upgrade). I used it infrequently becauselack of work in my area and being "retired"...
View ArticleRe: Am I making a tessellated sphere correctly in Creo
You might enjoy this... GOLF - Gentleman Only, Ladies Forbidden?
View ArticleClik here to view.
Re: Mathcad 15.0 Surface Plots - Extra "Depth" on Z-axis for data that does...
Its not a glitch in Mathcad.The main problem is that you are not provide a surface and IMHO Mathcad should even refuse to do a surface or contourplot of that data.You provide a simple list of points in...
View ArticleRe: Tables in drawing mode
No problem! If you have our tips folder, I copied that from a ppt deck called Automatic BOM Exploded View Drawings 09-10-2009. Or I can send you the table file we used.
View ArticleRe: Mathcad 15.0 Surface Plots - Extra "Depth" on Z-axis for data that does...
The first column is clearly the dependent data, so plot that as z. Then it works fine
View ArticleRe: Mathcad 15.0 Surface Plots - Extra "Depth" on Z-axis for data that does...
Thank you for replying. I performed a bunch of iterations of the same calculation in excel that vary three parameters (the X, Y, and Z in the plots). I thought I might be able to develop a better...
View ArticlePARAMETER EQUAL TO FILE NAME
Can someone please remind me how I can set a "string" parameter in my model equal to my file name. I know I've done this before, but its been awhile and I don't remember how.
View ArticleRe: Am I making a tessellated sphere correctly in Creo
What Antonius said. It sounds like the place to start is getting 40,000 points on the ball first.
View ArticleRe: Central Communication Part/File to All Upper Level Assemblies
I think you posted this in the wrong area. Sounds like you are using Creo Elements/Pro and not Creo Elements/Direct.
View ArticlePresentations for sessions?
Will they be available for download before hand? This was really helpful the last few years to help me narrow down my sessions. It's tuff when you are booked 4-5 deep.
View ArticleRe: Linking mathcad sheets
What you want may be possible using a scripted button, but I'm not sure what you mean by "The opened one will be set to a certain variable (allowable stress design), and the closed one is set to a...
View ArticleRe: How to perform robot through an external event
Hi, The Windchill Help Center includes robot samples that can be copied and pasted. You can find the links to these samples in the following topic:...
View ArticleInstalling MathCAD 15 on Windows 8?
Hi I'm having trouble installing mathcad 15 on my windows 8 laptop. Does anyone know how to do it?
View ArticleRe: Linking mathcad sheets
Thank you! we have two design procedures, one is called Allowable stress design (ASD) and the other is Strength design(SD). each procedure yields different results. i will set one sheet to (ASD) and...
View ArticleRe: Linking mathcad sheets
OK. If you use insert reference, then the referenced sheet is effectively embedded in the referencing sheet, so I would expect the memory requirement will be almost identical to having both sheets...
View ArticleSymbole diamètre +- ...
Bonjour à toutes et tous, est-que quelqu'un peut m'expliquer comment modifier les symboles de diamètres de tolérances plus ou moins dans les mises en plans. Merci d'avance.
View ArticleRe: Am I making a tessellated sphere correctly in Creo
It works. I'll write up a guide because it isn't straight forward. But it works. Thanks guys!!! This is amazing.
View Article