Re: Disable the Auto-numbering (for one document only)
You should use the OIR like follow: <AttributeValues objType="wt.doc.WTDocument|yuorSoftType"><!-- turn off auto-numbering --> <AttrConstraint id="number"...
View ArticleRe: Matrix Division Mathcad Prime 3.0
I see you follow Fredrik's orgiginal text and instead of a 5x7 and 1x7 you use a 5x7 and 7x1 matrix. So Fredrik can chose whatever he needs or transpose his matrix B first. BTW, you may shorten your...
View ArticleClik here to view.
Re: Cable bundle allignment
Though I'd try further up the tree. Can someone please explain what has happened here? Why it isn't following A STRAIGHT!!!! network?Can't be that hard to follow a straight line...And is there a way...
View ArticleRe: Highlighting text in Arbortext Editor 6.1 F000
Thanks for pointing to some workaround. We could adapt such features in Arbortext to our need.It would have been better if PTC pulled in this simple MS Word feature.
View ArticleRe: Area calcul in familly tables
Hello, put your relation for AREA calculating in POST REGENERATION relations. (see attached picture). In my opinion it means that ProE will do following: - regenerate model (change of size)-...
View ArticleClik here to view.
Re: Matrix Division Mathcad Prime 3.0
Werner Exinger wrote: I see you follow Fredrik's orgiginal text and instead of a 5x7 and 1x7 you use a 5x7 and 7x1 matrix. So Fredrik can chose whatever he needs or transpose his matrix B first.Yes,...
View ArticleClik here to view.
Clik here to view.
Re: how to develop this?
The problem with your model appears to be in the boundary blend definitions. If you flatten just one of the triangle, and place a point along a long edge, you will see the end of the sheet is no...
View ArticleRe: how to develop this?
One of the challenges was to get a sharp point at the top for the true circle. That is the reason for the high feature count. Of course, there is still the bend radius. Follow up work with the part...
View ArticleRe: Highlighting text in Arbortext Editor 6.1 F000
I might have misunderstood your question. What does "been better if PTC pulled in this simple MS Word feature" mean? I don't see how Arbortext Editor text highlighting is different from MS Word text...
View ArticleRe: how to develop this?
the half that you have flattened (flatten quilt) ..are the end edges flat?
View ArticleClik here to view.
Re: how to develop this?
I am going to assume so. I am working the boundary blend with control points. I cannot get a 4-arc circle to join completely with the 4 straight sides, but I can get 3 to work. So I have to trim the...
View ArticleRe: how to develop this?
strange when i use a plane to trim the surface and then flatten the edges are not flat.but when i cut with extrude and flatten the edges are flat.
View ArticleRe: how to develop this?
sorry sorry..my mistake... the one with control points and one boundary blend gives straight edges.the one with multiple boundary blend does not give straight edges.
View ArticleClik here to view.
Clik here to view.