How to make lines show up thinner when exporting drawing as a PDF in a Net...
Hello, I am using a Net Based Creo Parametric 2.0. When I export an engineering drawing to a PDF file, the resulting lines are too thick, and obscure some of the fine details. I have attempted to...
View ArticleExport functionality
Hi all, How to export all the Groups and Users from Flex PLM? Thanks,Varun
View ArticleRe: How to make lines show up thinner when exporting drawing as a PDF in a...
I think you read a few of my previous posts on this subject. I know this thread will get corrupted by all the other recommendations with 10 different directions in a hurry so again, try this first: Put...
View ArticleClik here to view.
Re: How to make lines show up thinner when exporting drawing as a PDF in a...
...and welcome to the forum!
View ArticleRe: How to create a LDAP Entry Manually.
If you have the LDAP backup of Production what is the error you are getting while importing into Test Server?
View ArticleExport and import of document list
Have tried to navigate through the help section of your pages regarding Windchill without luck. One of our major customers are using Windchill for a big project we are involved in. We have already...
View ArticleRe: Making a hole diagonal of rectangle
Thanks Ryan. Sandeep, welcome to the forum. Two ways of making holes when you do not have a good surface for placement:Create a plane where the hole can be placed and located.Create a revolved cut in...
View ArticleClik here to view.
Re: Colors on contour plots showing wrong.
Being curious I recreated the plot with MC 15 and here we don't have the wrong colors when plotting contour plots of matrices. We lack the color legend, though and would have to add it by creating a...
View ArticleClik here to view.
Re: poor mirror tool in Pro/Engineer
Tom, could you please test the axis pattern feature with both halves of a cylinder or a sphere merged together? As Frank has suggested? You might already have a model with this issue. I remember seeing...
View ArticleRe: Plotting a crystal in Mathcad
The plotting of one unit cell in a form of 3D plot in Mathcad is simple, Really? So lets see what you have done so far and attach your worksheet.That way we also would see what Mathcad version the...
View ArticleClik here to view.
Re: poor mirror tool in Pro/Engineer
That was a bearing cage that I was working with, and it is this model that I submitted to PTC support. It worked in the version I created them in but later versions caused it to fail so I could not...
View ArticleRe: How to save a particular Assembly configuration view and put it on a...
I have the full version of Creo 1.0
View ArticleRe: poor mirror tool in Pro/Engineer
This is Creo 2.0 M040 and how it differentiates a single cylinder from merged 1/2 cylinders manually merged. There is a difference in the Intent edge. http://www.youtube.com/watch?v=_kDX42a93V0...
View ArticleRe: How to save a particular Assembly configuration view and put it on a...
I have been trying to make this work reliably with the pin "connection' and I'm having all kinds of issues including crashes. There really has to be an easier way. The user defined connection works...
View ArticleRe: poor mirror tool in Pro/Engineer
Ah, yes. I just don't really get why it fails. Really, I've to admit. I don't. It's pretty bad that mirror feature, some of these strange pattern features, and some of the other odd features like...
View ArticleImport Excel info into Mathcad , and lookup values
Hello, I use mathcad 14. i am attaching a mathcad sheet and an excel sheet that i would like to import it as a table in mathcad to be able to look values for my variables. Based on the selected "Deck...
View ArticleRe: Import Excel info into Mathcad , and lookup values
You may either use the Excel component or, more transparent and straightforward, use READEXCEL().You will have to delete the last lines (delete the lines, not just the cells) as Mathcad will choke on...
View ArticleRe: Some help needed for a program to divide tube length
Sorry for my late reaction, but I was away several days and plenty of work meanwhile.Though, part of my problem is still there. Initially I know only the length LC1 of the first sector, but not the...
View ArticleI have a problem with my Mathcad 14
I have Mathcad 14. Now I cannot open it. When I click a <.xmcd> file I got the following warning:"There was a problem sending the commant to the program". I would appreciate it very much if...
View ArticleRe: I have a problem with my Mathcad 14
Are you able to start the program directly (via icon or programs list)?Did you try a reinstall of the program? (Save your license file first!)
View Article