Re: mapkey trouble in Creo 2.0
I created one to do what I think you are looking for and it works for me: mapkey )) @MAPKEY_LABELReference_Dim;\mapkey(continued) ~ Command `ProCmdEditProperties`;\mapkey(continued) ~ Select...
View ArticleRe: Helical sweep with variable pitch vanes
Frank is right, this type of part is made with investment casting. Typically a lost wax master with a hard shell for the casting process. If the material is a castable plastic, you might be able to...
View ArticleRe: Annotation color in Creo
I have a color table set to closely mimic the old Pro|E interface. Someone may have one that matches the WF interface. Technically, you can reset pretty much all the colors through a syscolor.scl...
View ArticleRe: mapkey trouble in Creo 2.0
Nevermind, I'm seeing what the problem is now. Looks like you'll need to create a separate mapkey for adding )(2X) at the end of a dimension.
View ArticleRe: Helical sweep with variable pitch vanes
'Sup Antonius! Yeah, I assumed he meant in plastic. That's gonna be pretty impossible to "mold". A spinning core MIGHT work, if the pitch change was in the other direction. Have to give it more...
View ArticleRe: Format issues (&PTC_WM_REVISION:D)
Frank, I just went through and updated all of our formats to reflect the correct PDMLink attributes and discovered the same thing. "Create the dwg without the format ("Empty" option), save it, then...
View ArticleRe: Format issues (&PTC_WM_REVISION:D)
Well, I hope my Pro/WINDCHILL-WORKAROUND helps you or others. It seems to work for me. A little annoying, but only a few easy/fast extra steps. One day I'll find the root of the issue.
View ArticleClik here to view.
Re: Pro/Sheetmetal Bend Question
Hi, All. I'm using Creo Wildfire 5 I've had much the same problem as was described in this post. Mine is a sheetmetal blend created between two sketches. I can't even create edge bends, which leads me...
View ArticleRe: Can I get Mathcad 15 if I buy a Mathcad Prime 3 now?
You need Prime3 and Mathcad 15 to be installed on the same machine to be able to to use the converter and convert MC15 files to Prime format. Be prepared that this undertaking will work painlessly for...
View ArticleRe: Shift surface problem
Try an offset from the solid file I provided. You should be able to do the offset including the rounds. To fill in two of the rounds is not a problem with a simply extrude of the edge.. However, the...
View ArticleRe: Pro/Sheetmetal Bend Question
Sheetmetal is a strange application when it comes to non-traditional shapes. It can do a lot but that 1st feature is key to successful follow on features. It looks like you are merge a representation...
View ArticleRe: trumpet
Welcome ot the forum, Angel. This can be created fairly simply with a sweep (red tube) and a variable section sweep (horn) or a revolve merged with a sweep for the U-turn. You can join the two with...
View ArticleClik here to view.
Re: Format issues (&PTC_WM_REVISION:D)
If you're not careful, Frank, PTC will make Pro|WorkAround an optional extension! I can see a business case where this can really boost the bottom line Obviously this should be reported to the...
View ArticleClik here to view.
Re: Plotting a Cylinder
There may not be explicitely a cylinder shown there but the built in help and tutorial shows you how to plot a parametric surface, a parabolic cylinder and surfaces of revolution, which should help get...
View ArticleClik here to view.
Re: Printing PDF vs. TIFF
David Schenken wrote: TIFF is a bitmap, and has a minimum width line based on the DPI you allowed when the file was created. Given a PDF, Adobe Reader or Acrobat will attempt to produce the actual...
View ArticleClik here to view.
Re: Pro/Sheetmetal Bend Question
This is what I was thinking. It does have some real challenges in working out the math to fit a certain shape. But mine are parallel planes and it looks like yours are not. Now seeing the flat edge...
View ArticleRe: Redefining an undefined variable
In cases, linear interpolation was overpredicting the data and the actual formulae have powers of it this coeff, so it introduced error. Hence I decided to go for spline. But in a a ramge of Reynolds...
View ArticleRe: mks java api connection error
Have you made sure that the Integrity Server is configured to allow API connections? I think it's covered under the Integration Builder's Guide but to make sure, you should go to <Integrity Server...
View ArticleRe: Creating PDF issues
Ken, I might suggest your pen table file is not complient for some reason if it is in the working directory. I have a very simple pen table called table.pnt in my working folder and it works wonders....
View ArticleRe: If you like the drawing ribbon, what do you like about it?
Corry Daus created an idea to change the tab with object selection; please vote it up:http://communities.ptc.com/ideas/3490
View Article