Re: Using Old MathCad
with the help of "More Like this" I was able to install My latest version of Math Cad. thanks for the help.
View ArticleRadau Solver error: this value must be a vector.
I get an error with Radau(init, x1, x2, intvls, D) as 'This value must be a vector.' I'm quite sure I made init and D vectors, and x1 x2 intvls ordinary numbers. Please see the attachment and tell me...
View ArticleRe: Radau Solver error: this value must be a vector.
Use the literal index for t.0, not the vector index.
View ArticleRe: Radau Solver error: this value must be a vector.
Thanks, Werner. That should be one of the problems. But it seems it does not let the solver back to work.
View ArticleRe: Radau Solver error: this value must be a vector.
The other problem is ths function is complex enough for the Radau, the difference between x1 and x2 need to be small enough to allow the solver work.
View ArticleRe: Sheet Metal Flat State Calculation difference between PRO-E & Inventor.
You stated: "After migration to PRO-E , for the same sheet metal component , after inputting the same k-factor value , we have a difference in the flat state value of the sheet metal component." What...
View ArticleRe: Radau Solver error: this value must be a vector.
Having re-written t0 as t.0, you need to rewrite t/t.0 (in both first and last terms of DD) as well, because Mathcad still thinks t is a vector. When you do this you get the error that the problem is...
View ArticleDrawing sections - another oversight?
Today I found another annoying selection problem in drawing sections. Maybe someone has a Pro|WorkAround^TM. I had a offset section (model created) in a drawing where I erased all the hatching. Then...
View ArticleTutorials
Hi everyone, I was wondering if someone has some PDF tutorials or could link me to some tutorials about how to use Creo 2.0 Parametric I can use. Matt
View ArticleClik here to view.
Re: Ignore Zero / Blanks from Excel
I am very new to mathcad you answer quicker than I can provide data
View ArticleRe: Ignore Zero / Blanks from Excel
Attached is the data I am working with... I have not tried the READEXCEL yet will work on that. If it will plot the points I then want to use the curve fitting functions to produce a curve for the...
View ArticleNoob With ProE, Help Needed
Hey everyone, I just recently started an engineering internship and this company uses ProE WF4. I don't have any CAD work under my belt except for a semester at Purdue. I am having some troubles and...
View ArticleClik here to view.
Re: someone can repair heal the dimples that are corrupted?
I was just going to delete them all out and put them back in. But I can not figure out a simple way to get the pattern to work. Can draw in 100+ points, but that's a lot of work.
View ArticleRe: someone can repair heal the dimples that are corrupted?
thank you but sorry I can't do that.
View ArticleRe: Ignore Zero / Blanks from Excel
Have a look if the attached helps. I have used Werners suggested method. It needs advancing but will be a good start.
View ArticleRe: Noob With ProE, Help Needed
You don't supress the unbend; the cuts depend on it. You need to use bend-back.
View ArticlePublishing w/Remote Site & WAN Utilization (long)
We currently have one master site and one remote site with limited bandwidth between them. A remote file server has been configured to reduced the load on on the WAN connection during business hours...
View ArticleClik here to view.
Re: Ignore Zero / Blanks from Excel
So if you follow my suggestion, I will follow yours and filter the zeros I still don't like the Excel component but other than in Mathcad it seems to be the only possible way in Prime to embed the data...
View Article