Re: Using vectorized solve block to solve for multiple inputs.
You need to vectorize it when you call the function, not when you create it.
View ArticleRe: Trial 'Fatal error' and no C Drive access
Traceback files are encrypted hence it will not make any sense for you if you will open and read that.
View ArticleClik here to view.
Text Alignment
Hi everyone, I've been facing an issue regarding text alignment. I've included an example of what our text looks like below: Is there any way to make the text all line-up under the "you" at the...
View ArticleRe: Trial 'Fatal error' and no C Drive access
Oh right, well thanks again for the quick and accurate response.
View ArticleRe: Finding if a point is inside of an drawn area or not
Here is a testsheet to compare different algorithms with different data sets. I included Alan's second approach and Stuart's algorithm and hope I moved them over correctly. I also added one where I...
View ArticleRe: Text Alignment
The simplest (probably) is two separate pieces of text. Place one offset and reference the other to keep them together.
View ArticleRe: permanent material library
Set the config.pro/.sup option pro_material_dir P:\ProE_Library\materials (or whatever directory you like)
View ArticleRe: someone can repair heal the dimples that are corrupted?
Antonius got you mostly there, you should be able to take his models and just draw in the missing balls.
View ArticleRe: someone can repair heal the dimples that are corrupted?
I only have an older version of creo. If you have a version of Solidworks, use that to export a STEP file. Sometimes when I get vendor STEP files, I import it into Solidworks, and that usually...
View ArticleRe: Displaying cosmetic features in detailed views
I avoid cosmetic feaures (except threads) like the plague. I'd use a datum curve instead, much more robust, and as mentioned make a layer for it.
View ArticleRe: formatting in mathcad 3.0
I made a start and would be possible with a little playing around.
View ArticleClik here to view.
Re: Dimension round up and tolerances in drawing mode
You are tryin to apply logic to the ways of PTC, aren't you? Yes, internally the values remember your math... where an entry of 5/64 really is .078125 although at 3 places it shows as .078. I don't...
View ArticleRe: formatting in mathcad 3.0
Following up from my previous effort you could reduce the text size right down to allow it to fit on a single page. You will have to break the data down into multiple Excel components.
View ArticleRe: Graphing not working Using Genfit Coefficients
Ranjan Nadarajah wrote: I am not clear on this point. Can you please explain. Thanks. You may (re)define ORIGIN globally to zero as Mike has done, but the most easiest way to make your sheet work is to...
View ArticleRe: How to proceed from here,having trouble with surfacing.
Why surface it, it appears you can achieve this with solids. Edit: I just did it with a solid and a rnd containing 3 sets of full rounds. 2 features. I'm assuming it's toroidial on the ends?
View ArticleRe: DTD setup and other MIL STD config files
Typically, a revised DTD includes a section describing modifications since the previous release. This is where context problems will occur. The TDT is a tag description table that describes the...
View ArticleHow to make a wire/fiber splice in creoShematcis 2.0
Hi everyone,I am new to Creo shematics and I have troubles making a simple splice on a wire. I precisely followed the indications in the doc page "To Insert a Splice" with no success; the cursor does...
View ArticleRe: Windchill 10.1 WGM $ Creo Schematics 2.0
Jim, I have a few questions for you: 1.) How do you know if WGW manager was installed when Windchill was installed?2.) If it was not, is all you do is run the PSI and select and install?3.) Also, where...
View ArticleRe: Best practices documents?
There are few best-practices; there are some methods people have chosen for consistency in model development. I don't think documentation is the solution. Working with parametric modeling is very...
View ArticleClik here to view.
Re: New to Mathcad
First, does anyone know what this means I understand it is some kind of function. The deltas are displacements.We cannot say much from a small picture, but at least we can see that you are using...
View Article